Uses of Interface
com.atid.lib.types.IEnumType

Packages that use IEnumType

Package	Description
com.atid.lib.module.barcode.spc.type
com.atid.lib.module.barcode.ssi.type
com.atid.lib.module.rfid.uhf.types
com.atid.lib.reader.types
com.atid.lib.transport.types
com.atid.lib.types

Uses of IEnumType in com.atid.lib.module.barcode.spc.type

Classes in com.atid.lib.module.barcode.spc.type that implement IEnumType

Modifier and Type	Class and Description
class	AustralianPostInterpretation This option controls what interpretation is applied to customer fields in Australian 4-State symbols.
class	CheckDigit No Check Digit indicates that the scanner reads and transmits bar code data with or without a check digit.
class	CodabarCheckCharacter Codabar check characters are created using different “modulos.”
class	CodabarConcatenation Codabar supports symbol concatenation.
class	Code11CheckDigitsRequired This option sets whether 1 or 2 check digits are required with Code 11 bar codes.
class	Code39CheckCharacter No Check Character indicates that the scanner reads and transmits bar code data with or without a check character.
class	CodePages ISO 2022/ISO 646 Character Replacements Code pages define the mapping of character codes to characters.
class	GS1Emulation The scanner can automatically format the output from any GS1 data carrier to emulate what would be encoded in an equivalent GS1-128 or GS1 DataBar symbol.
class	MSICheckCharacter Different types of check characters are used with MSI bar codes.
class	ResponseType The device responds to serial commands with one of three responses: ACK (0x06) Indicates a good command which has been processed.
class	TelepenOutput Using AIM Telepen Output, the scanner reads symbols with start/stop pattern 1 and decodes them as standard full ASCII (start/stop pattern 1).
class	UPCAEAN13ExtendedCouponCode Use the following codes to enable or disable UPC-A and EAN-13 with Extended Coupon Code.
class	VideoReverse Video Reverse is used to allow the scan engine to read bar codes that are inverted.

Uses of IEnumType in com.atid.lib.module.barcode.ssi.type

Classes in com.atid.lib.module.barcode.ssi.type that implement IEnumType

Modifier and Type	Class and Description
class	AustraliaPostFormat To select one of the following formats for Australia Post,
class	AztecInverse This parameter sets the Aztec inverse decoder setting.
class	BooklandISBNFormat If Bookland EAN is enabled, select one of the following formats for Bookland data - Bookland ISBN-10 / Bookland ISBN-13
class	CodabarStartStopCharactersDetection Select whether to detect upper case or lower case Codabar start/stop characters.
class	Code11CheckDigitVerification This feature allows the decoder to check the integrity of all Code 11 symbols to verify that the data complies with the specified check digit algorithm.
class	CodeLengthType The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
class	CompositeBeepMode To select the number of decode beeps when a composite bar code is decoded, scan the appropriate bar code.
class	CouponReport Traditional coupon symbols (old coupon symbols) are composed of two bar codes: UPC/EAN and Code128.
class	DataMatrixInverse This parameter sets the Data Matrix inverse decoder setting.
class	DecodeMirrorImages Select an option for decoding mirror image Data Matrix bar codes (Data Matrix Only)
class	DecodeUpcEanJanSupplementals Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2).
class	GS1DataBarLimitedSecurityLevel The decoder offers four levels of decode security for GS1 DataBar Limited bar codes.
class	HanXinInverse This parameter sets the 1D inverse decoder setting.
class	I2of5CheckDigitVerification Enable this feature to check the integrity of all I 2 of 5 symbols to verify the data complies with either the specified Uniform Symbology Specification (USS), or the Optical Product Code Council (OPCC) check digit algorithm.
class	I2of5SecurityLevel Interleaved 2 of 5 bar codes are vulnerable to misdecodes by the nature of the symbol, especially when Any Length is set for Interleaved 2 of 5 bar codes.
class	IntercharacterGapSize The Code 39 and Codabar symbologies have an intercharacter gap that is typically quite small.
class	Inverse1D This parameter sets the 1D inverse decoder setting.
class	ISBTConcatenation Select an option for concatenating pairs of ISBT code types
class	LinearSecurityLevel The 1D Barcode Scanner offers four levels of decode security for linear code types (e.g.
class	MSICheckDigitAlgorithm Two algorithms are possible for the verification of the second MSI check digit.
class	MSICheckDigits With MSI symbols, one check digit is mandatory and always verified by the reader.
class	Preamble Preamble characters are part of the UPC symbol, and include Country Code and System Character.
class	QRInverse This parameter sets the QR inverse decoder setting.
class	QuietZoneLevel1D This feature sets the level of aggressiveness in decoding bar codes with a reduced quiet zone (the area in front of and at the end of a bar code), and applies to symbologies enabled by a Reduced Quiet Zone parameter.
class	RedundancyLevel The decoder offers four levels of decode redundancy.
class	SecurityLevel The decoder offers four levels of decode security for delta bar codes, which include UPC/EAN and Code 93.
class	UpcCompositeMode If you enable Composite CC-A/B , select an option for linking UPC symbols with a 2D symbol during transmission as if they were one symbol
class	UpcEanJanSupplementalAIMIDFormat Select an output format when reporting UPC/EAN/JAN bar codes with Supplementals with Transmit Code ID Character set to AIM Code ID Character:
class	UpcEanSecurityLevel The 1D Barcode Scanner offers four levels of decode security for UPC/EAN bar codes.

Uses of IEnumType in com.atid.lib.module.rfid.uhf.types

Classes in com.atid.lib.module.rfid.uhf.types that implement IEnumType

Modifier and Type	Class and Description
class	AlgorithmType The AlgorithmType enumeration represents the algorithm by which the RFID UHF module inventories the TAG.
class	BankType The BankType enumeration specifies the memory bank of the RFID UHF tag.
class	GlobalBandType The GlobalBandType enumeration represents the frequency direction of the RFID UHF module.
class	LinkProfileType Link Profile is an option to set the air interface method of RFID UHF
class	Mask6cAction The Mask6cAction enumeration type indicates the status of the Flag when the RFID UHF module performs the Inventory operation and the pattern of the given Selection Mask is set as the Target value of the Selection Mask according to the condition.
class	Mask6cTarget The Mask6cTarget enumeration represents the Flag where the result status of the Selection Mask will be saved when the RFID UHF module is inventoried.
class	SelectFlag The SelectFlag enumeration represents the status of the Select Flag of the TAG to be the Inventory target when the RFID UHF module is running the Inventory.
class	SessionFlag The SessionFlag enumeration type indicates the status of the Session Flag of the TAG to be the Inventory target when the RFID UHF module is running the Inventory.
class	SessionTarget The SessionTarget enumeration represents the Session Flag of the TAG to be the Inventory target when the RFID UHF module is running the Inventory.

Uses of IEnumType in com.atid.lib.reader.types

Classes in com.atid.lib.reader.types that implement IEnumType

Modifier and Type	Class and Description
class	BuzzerState Indicates the buzzer status of equipment that supports Buzzer.
class	CommType ATEAReader Indicates the communication protocol of the instance and equipment.
class	DataType It distinguishes whether the data received from the equipment is barcode data or TAG data of RFID UHF.
class	KeyState The KeyState represent state of key.
class	KeyType The KeyType represent type of key.
class	NotificationState The NotificationState enumeration represents the notification of the Device.
class	NotifyTimeType The NotifyTimeType enumeration represents the notification time of the Device.
class	OperationMode The OperationMode enumeration type represents the Device's Operation Mode.
class	UsbChargerControl The UsbChargerType enumeration specifies whether to connect or disconnect a device connected to the USB port on the device.
class	UsbChargerState The UsbChargerState enumeration represents the usb charging of the Device.
class	UsbChargerType The UsbChargerType enumeration represents a device connected to the device's USB port.

Uses of IEnumType in com.atid.lib.transport.types

Classes in com.atid.lib.transport.types that implement IEnumType

Modifier and Type	Class and Description
class	ConnectState The ConnectState enumeration indicates the connection status of the ATransport instance.
class	ConnectType The ConnectType enumeration indicates which communication method the ATransport instance uses in its connection with the appliance.

Uses of IEnumType in com.atid.lib.types

Classes in com.atid.lib.types that implement IEnumType

Modifier and Type	Class and Description
class	ActionState ActionState indicates the current operation status of the device.
class	ActionType
class	DeviceType The DeviceType enumeration represents the type of device associated with the SDK.
class	ModuleBarcodeProtocolType
class	ModuleBarcodeType The ModuleBarcodeType enumeration indicates the type of Barcode Module installed in the instrument.
class	ModuleRfidUhfType The ModuleRfidUhfType enumeration indicates the type of RFID UHF Module installed in the instrument.
class	ResultCode The ResultCode enumeration represents failure and behavior results.